Degasser Repair Services and Parts
Available : Agilent 1100 1200 Degasser Red Light
We provide repair services and parts
for all of the Agilent and HP 1100, 1200, 1260 and 1290 series model G1322A, G1379A, G1379B and G4225A stand alone degasser modules as well as
the integrated degassers found in the 1260 and 1290-series pump modules (e.g. G1311B,
G1311C, G1312B, G1312C, G4204A and G4220A & B).
These modules most commonly fail after five years of normal use. Failure of the degassing
system should be addressed quickly as a degasser which does not meet the manufacturers
operating specification may put your entire HPLC system out of compliance or validation.
Save Money:
Our repair prices are far less than what Agilent Technologies charges.
We use the exact same parts that
Agilent does (and offer optional higher quality parts too) and can often inexpensively
"repair" systems (vs. replacing complete modules at a far higher cost), which
Agilent and other companies can not do. We can also optionally customize and upgrade the
degassing module's performance using the latest technology smaller volume vacuum chambers
to reduce delay volume, flushing and solvent change-over times without decreasing vacuum
degassing capacity. The diagnosis, repair and testing services are all done in our shop by
experienced professionals. *All of these repairs and/or services can be done for a
fraction of the price charged by Agilent Technologies.
Professional
Diagnostic Testing of your Degassing Module
Repair, Cleaning
and/or Replacement of Defective Parts
Optional Low Volume
Vacuum Chambers Available
Optional Higher
Performance Vacuum Pump Upgrades
Complete Retrofit
Upgrades with Better Performance for the G1322A
Option for
Professionally Refurbished Parts to Save You Money
Replacement of
Complete Flow Path for Contaminated Systems
Degasser Repair
Services for Waters, Thermo, Dionex, Shimadzu & Phenomenex brand systems too
Lowest Prices,
Highest Quality & Quick Repair Turnaround Times
Parts For Sale:
Vacuum Pumps, Solenoids, Vacuum Chambers, Control Boards
When you send your Agilent or HP brand
HPLC degassing module to Chiralizer Services, we will correctly determine which parts of
your degasser are defective and send you a formal quotation to replace the defective parts
and test the system. We do charge a nominal diagnostic fee to evaluate, clean and test
your degasser, but you retain control over the decision to have it repaired or not.
Sometimes a cleaning is all it needs. Please give us a call or send us an email to discuss
your needs and we can forward you a diagnostic quote with shipping return instructions.
Note: For the fastest response, please send us an email which includes your full name,
company name, full address, phone #, Degasser Model #, Degasser Serial Number.
 
|
