New and Refurbished HPLC Degasser Parts Available :

• HPLC Degassing Vacuum Pumps & Chambers. The most common part to fail inside most manufacturer's HPLC Degassing modules are the vacuum degasser pumps. These are consumable parts which operate under very stressful conditions. If well maintained, they often wear out after four to six years of service. We offer brand new and refurbished direct replacement vacuum pumps of the same or optionally with an upgraded specification for better performance. Our prices are much lower than the original manufacturer's and if you would like to save even more money, then we offer fully refurbished parts for some systems at huge discounts too.

  Examples of HPLC Vacuum pumps, Vacuum Chambers, Degasser Parts and a few of the brands of systems that we stock and service:

  • Vacuum Pumps for the Agilent (HP) G1322A, G1379A, G1379B, G4204A, G4220A, G4220B, G4225A,  G7104A, G7120A, G1311B, G1311C, G1312B and G1312C Degassers. P/N G1322-60000, G1379-60000, G1311-60007, 5067-4796, G1322-60003;

  • Waters brand Alliance / Acquity Series, 2690, 2695, 2790 and 2795 HPLC Degasser Upgrade Kits, Vacuum Pumps, Vacuum Chambers and other Parts Available to Improve Performance;

  • Shimadzu DGU-Series Degasser Module Vacuum Pumps, Parts & Repairs;

  • Thermo Accela 600 and 1250 Integrated Degasser Repairs (in the Pump);

  • Degassing Module Repair for other brands available (e.g. Hitachi, Shimadzu, PE).

  • Our Parts and Repair Services Are Much Lower In Price Than Agilent Technologies,  Waters and Other Manufacturer or Third Party Companies

  We also stock many replacement parts such as solenoid valves, vacuum control boards, vacuum chambers, tubing, vacuum sensors and other related items to repair many of these modules.

  Send us your Agilent, HP, Waters, Shimadzu or other brand HPLC degassing module to determine what repairs are needed. We will correctly determine which parts of your degasser are defective and send you a formal quotation to replace the defective parts and test the system. We do charge a nominal diagnostic fee to evaluate, clean and test your degasser, but you retain control over the decision to have it repaired or not. Sometimes a cleaning is all it needs.

  • Professional Diagnostic Testing of Your Degassing Module is Available;

  • Repair, Cleaning and/or Replacement of Defective Parts;

  • Optional Replacement of Large Volume Vacuum Chambers (i.e. 12 ml) with 0.5 ml Chambers to reduce flush times (i.e. solvent wasted) and improve performance;

  • Optional High Performance Vacuum Pump and Chamber Upgrades;

  • Complete Fixed-Price Retrofit Upgrades Available with Better Performance for the Agilent and HP G1322A and Waters Alliance/Acquity Degasser Modules (These are recommended when your degasser is in very poor condition. All new and much higher performance parts are used and the cost is about half of what a new system would be);

  • Options for Professionally Refurbished or New Parts to Save You Money;

  • Lowest Prices and Highest Quality;

  • Quick Repair Turnaround Times of 1 to 2 Business Days for Most Degasser Modules.

Please give us a call or send us an email to discuss your needs and we can forward you a diagnostic quote with shipping return instructions. Note: For the fastest response, please send us an email which includes your full name, company name, full address, phone #, Degasser Model #, Degasser Serial Number.